MigMe / Mig33 World

Frequently Asked Questions:

-How to use Login IDs in TMA-III? [Basic Steps]
-In TMA-III you will need to take patience. TMA-III has many sockets function with its own Active-X environment so it may take litle time to successfully Open. 1st of all you need to Select the Fastest IP of Mig33. Click on "Resolve IP" button present at the bottom of the "control panel" of the TMA-III. Now confirm your SPY ID, Watch Id & Multy Ids. Set them in the Setup Box [Multy Ids] & Controll Box [Spy&Watch ID]. You can manually Save IDs directly in to the configuration file. Check the following snapshot:


-Select the the Number of Login IDs And Click on "Take Position All" >> "LogIn All". Now you can check the "Status" of your IDs check the "S-1" to "S-8" tab in the "SetUp" box.

-My TMA-III is hanging. What to do now?
-First of all you should check the System Requirement Information which displaying on the Installation window of TMA-III.
Minimum System Requirements:
-Pantium IV processor.
-512 Mb RAM.
-20 Mb Storage space.
-Windows XP-SP2 Operating System.
-You can disable the PopUps menu sound. Click on Theme and disable the "PopUp Menu sound". Its better if you also disable the "Popup menus". you should Login your IDs as "10x1". Do not open many options in TMA-III. You can do according to your system configuration. Check the "CPU Meter" present at the bottom of the tool.

-Why target list background color is changing?
-If you have set any target in the target list and your Spy Id is in room. then it will auto indicate you the Room users activities. It will help you to easily monitor the room users and targets


White Color = Target has left the room.
Green Color = Target has been Kicked.
Red Color = Target has entered.
Yellow = Target's Kick has started.

-How to do Brutall and Fast kicking?
-Well its depend upon your internet connection speed. If you have fast internet connection then you can try "Master Brutall". Open the Master Brutall from the TMA-III main menu. Set the IDs in Master Brutall. Select the users from the Room user List [Controls Box] and create a target list. Login IDs in "Master Brutall" Enter all the Ids In room and Press "KICK ALL" button on "Master Brutall".

But if you dont have fast internet connection then LogIn your multy Sets in the "SetUp Box" with 50x1 or 100x1 option. You can do the same, just enter your all 10 Ids in the selected room and press "Kick All" button.

-Why Ids are not Auto leaving the room after enable "Auto Leave" option?
-Have you entered your SPY Id in that room? Is your chatbox is disabled?
Tip- Disable the "emotions" of chatbox for fast detection.
IF still IDs are not leaving, it means your Ids are silent in room from a long time. Please relogin all IDs.

-Where is "Admin Caller" and why it is not working?
-A yellow color button of caption "Admin Caller" present below the "Room List Combo". Your "Watch ID" must be online in TMA-III to invite admins. Also check the "Admin List" to confirm about admins username. Check the following snapshot:

-How to protect my friends during kicking? Where is protect user option?
-Check the above 1st snapshot. There is a button "Citizens" click that Now you can type the Protected usernames there or click the username in the Room user list and press "S" button present at the right-bottom side of the "Room user list"

-How to do GC-Bomb & PVT-Bomb attack?
-Check the "GC Bomber" option in the "Room" Tab of the "Flood box". Please confirm your "Watch ID" has added in the contact list of all the Multy Ids which is being used in TMA-III. Login your "Watch ID" in the controls box. Select Target in the "Target" Text Box. You must have to Login all the 8 sets for unlimited GC-bomb Loop.

-How to do Group Chat Flood?
-Open the Floodbox >> Group Tab. Here Login your "Flooder ID" [this Id will flood in Group Chat window]. Login your "Inviter ID" [this Id will Invite other users in Group window].
Tip: Use your main Id as Inviter Id to invite your friends in group.
-Now LogIn your both Flooder & Inviter ID. Make assure that your "Flooder ID" has logged in successfully.
-Type the "Target username" in the Pink color Target Textbox.
-Press the button "Create GC with Target". Now your Inviter Id will invite your Flooder Id in the PVT of the Target.
-Now make confirm, that a alphanumeric GC code is displaying in the DC Code textbox or not?
--If not, then Logout your flooder ID and Stop the Flood. Relogin your Flooder ID. and Invite that flooder in the pvt of target by the Sjboy emmulator.
--Press "Get Code" button immidiately after create Group window. [Just press one time "Get Code" button]
--If GC-code has come, you may select the Speed and Flood types options and Can start the Flood.

How to invite other users in Flooding group?
-Open the next Tab present at the Right-side of the "Group" tab, Write the usernames here which is present and Online in your Inviter Id contact list. And press the "G" button to invite them.
Tip: write the Inviter Id username in the any textbox of this tab, to invite itself in the Flood group.

How to do roll flood in group?
-For this you must have to use Flooder Id which has added itself in its contact list. Example: If my Id is "Yash" then i must have to add "Yash" in its contact list.

-How to do Email bombing and fake mail bombing?
-First of all I wana inform you about Cyber Crime. Sending Fake mails is a kind of cyber crime. So use this option on your own risks.
-Goto the "Mails" tab of the "Flood Box". now you can do from there.

How to do room flood from Flood Box?
Simply Open the "Floof Box" from the "ControlBox". Select the "Room" tab. Now Press the Green Color "<>" button to Login "room Flooder IDs".
Login your Room Flooder IDs from there. You can call any Multy "set" in Flood Box by pressing radio buttons "Set-1, Set-2.....Set-8".
From ther you can do 3 types of Floods-
-1- Templet Flooding [Select Templet Radio Button and Press "Load-1,Load-2...Load-4" button to Select Templets".
-2- DC Codes Flooding [Select "DC Codes" Radio button".
-3- Manuall Text [Type your Text in the "Manual Text" textbox]
Now Press "Enter" button to enter IDs in room. [you must have to press "Enter" button even if your IDs are already present in room]

Now there are 3 Options- "AUTO FLOOD" or By pressing "Send-1" "Send-2" button. Uper "Send-1, Send-2" buttons are to Flood DC Codes by Set-1 and Set-2. Lower "Send-1, Send-2" buttons to Flood Templets" and the Last "Send-1, Send-2" buttons are to Flood "Manuall Text"
You can use the SPEED CONTROLLER to maintain the Flood Speed according to your Net speed.

How to do ROLL TEXT FLOOD in room?
-LogIn your all 8 sets in Control Box [Setup Box].
- Select Room name in controll Box.
-Now type your Flood Message in the textbox present above the "Roll All" button.
-Set the "time interval" Value in the textbox present at the Left side of the "Roll All" button. By default its value is "15".
-Select "03" radio button present near the "Roll-All" button in the right bottom of the ControlBox.
-Now press "ROLL-ALL" button.

What about the ROLL-KICK?
Wel that was just my effort to do roll-kick, As we know mig has bann the roll kick. So i dnt think it will work honestly. But you can try it.

How to do ROOM GC BOOM?
-First of all Login your "Watch ID" in the ControlBox. Now Select any Room name and create the Room users List.
-Remember here is no option for protect users. All the room users will be effected by Room-Gc-Boom.
-Keep your Watch ID online on the contact list of all your MULTY IDS.
-Now you can press "ROOM GC BOMBER" button on the flood box.

What are Sniff Kick, Auto Kick, Shoot-At sight Kick, WildCard Kick?
Auto Kick - When any user will enter in room, TMA-III will start his Kick.

Sniff Kick- Select the Sniff Kick option from the "Settings" button of ControlBox. Select any Alphabate [A to Z]. The entered user whose username is starting with the Selected alphabate, will be kicked.

Shoot At sight Kick- In this kick you can type the username of your targets in the Targets textboxes. Now if any target of them will be enter in room, TMA-III will start his kick.

WildCard Kick- Its almost same as "Shoot at sight" kick. WildCard option is to recognize Multy ids of same series.
Example: If your enemy has Multy Ids of series "abc-xxx-001","xyz-abc-xyz","abcabc-xyz","xx-abc-xx-02". In this series word "abc" is common. So you can write "abc" in the "Wildcard textbox". Now if any id entered in room containing the word "abc", will be kicked.

How to do BOT Flood in Room?
-Open "Flood Box", Click on "Green Vertical button <>" to Set Room Flooder ID..
- Now type the "Same ID" in "Room Flooder Set-1 and Set-2".
Example: If my Flooder ID is "roomflood" then in all the Textboxes of both "Room Flooder Set-1 & Set-2" I will write "roomflood".
-Now "Load" "Room templet-3".
-Now Enter your id in room and Start "BOT Flood".

------------------

HOW TO USE:

------------------

As I know that you know its Basic Features Like:
-Save/Load Multy IDs & Spy IDs.
-Save/Load Protect Users [Citizens] & Targets [Enemies].

==================================================================
Labeled Diagram Of TMA-III [Reloaded] Main window

Spoiler:

1 - Control Box - To Come back on the Main window of TMA-III.
2 - SetUp - To Save/Load Multy IDs.
3 - Master Brutall - To Open Master Brutall [Duel & Brutall Attack]
4 - ATM - To Check & Transffer Credit On IDs.
5 - Admin Kicker - To Protect your Room From your ADMIN or Moderator ID.
6 - Abuser - To Send Templet Texts From a Single ID in a room with a Time Interval
7 - Pass Changer - To Change The passwords Of many Ids in less time.
8 - Extra - Its an Extra Menu with Extra Ordinary Features Like : Multy IDS Creator.
9 - About - To send your Feedback & to Learn about TMA-III
10 - Themes - To Change the Look and To Enable & Disable Popup menus Options.
11 - Exit - To forcely Close the Tool.
12 - Enemies - To Create Open Target Lists For KICK ALL.
13 - Citizens - To Protect Users from KICK options.
14 - Users List - Room Users List Of a Selected Room.
15 - File Editor - To open & Manual Edit Templets/SetUp Files of the Tool.
16 - ChatBox - To Chat with your SPY ID in any Room with Smilies support.
17 - Targets - To Create Targets List from Room users List.
18 - Select Set - Select Set To Start Kick.
19 - KICK ALL - To Kick all the Selected Targets of Target List.
20 - S R C - S= To select user to Protect
R= Remove User from Room users List
C= Clear List
21 - RoomName - To Select/Add/remove Roomname
22 - AdminCaller - To Call Mig33 Global Admins for Help in Room.
23 - "Take Position" & "LogIn All" - To Set/Reset & Login/Logout All the Loaded Multy Ids together.
24 - To Send Text From Spy Id in Room chat.
25 - Login Spy & Watch Id.
26 - Enter/ Kick / Left Option of SPY ID.
27 - Enter / Kick / Left Options for Set by Set.
28 - To Set Manual Target.
29 - Shadow Target - Newly entered username in any room.
30 - To open FloodBox & Multy Chat Window
31 - Settings - To Set AutoKicks Settings / Auto Greet & Spy Ids Settings.
32 - To Send Room texts from any Multy set & To Roll any Multy Set in room.
33 - Room message Text Box.
34 - Roll Flood Styles From all Sets with Delay Option.
35 - Roll All - button to Start Roll All Flood.
36 - IP & Port TextBox with IP RESOLVER.
37 - Roll Kick - To effort kick with Rolling Ids.
38 - Online Information.